|
|
|
|
|
|
Deckmate 90166 Deck Bench Bracket with Bench Bracket, Structural Resin
|
|
|
You determine the size. Connect with railing brackets with 2x4 and 2x6 lumber to easily add a bench to any size or shape deck. Gain increased seating area while using only 7" of deck space. Assembled unit stands 36"H for deck railing, seat is 17"H. Quick and easy to assemble using basic tools. Includes bench bracket, hardware and instructions. LUMBER NOT INCLUDED.
|
|
|
|
|
|
|
|
|
|
Corner Reinforce 1-1/4x3-1/16 - Case of 25
|
|
|
Reinforces 90 degree wood-to-wood connections. G90 galvanizing finish. Requires 16d nails for installation. 12 Gauge.
|
|
|
|
|
|
|
|
|
|
Hopkins 90158 Workbench Kit
|
|
|
Create a workbench, worktable or power tool stand. Add 2x4's plywood or particleboard to make a workbench, worktable or power tool stand in any length or width up to 8'L x 4'W. Simple assembly in less than an hour with only powered screwdriver and a saw. Only straight, 90-degree cuts required, no miter or angles. Made of structural resin. Kit includes: 4 legs, hardware and instructions. LUMBER AND SHELF LINKS NOT INCLUDED.
|
|
|
|
|
|
|
|
|
|
CORNER REINFORCE 1-1/4X4-13/16 - Case of 25
|
|
|
Reinforces 90 degree wood-to-wood connections. G90 galvanizing finish. Requires 16d nails for installation. 12 Gauge.
|
|
|
|
|
|
|
|
|
|
TZ BEARING PLATE3X3X9/64IN 10G - Case of 50
|
|
|
Offers anchor bolt adjustment slots.
|
|
|
|
|
|
|
|
|
|
TZ PIPE RAIL TIE 2IN 16GAUGE - Case of 50
|
|
|
Use to quickly connect 2" (2-3/8" outside diameter) vertical pipe posts to wood fence rails. Requires (1) 1/4" HDG carriage bolt and nut (included) for tightening pipe rail tie to pipe and (4) 1/4" lag bolts for attaching tie to rail.
|
|
|
|
|
|
|
|
|
|
Stud Shoe 1-9/16x5in Sng 16ga - Case of 50
|
|
|
Typically used with 2" OD pipe to reinforce joists, plates, studs, or rafters which have been drilled or notched during construction. Not for total member replacement in structural applications. G90 galvanized finish. Single stud requires ten 10d x 1-/12 fasteners and double stud requires twelve 10d and 2" maximum hole size.
|
|
|
|
|
|
|
|
|
|
STUD SHOE 3-1/16X5IN DBL 16GA - Case of 25
|
|
|
Typically used with 2" OD pipe to reinforce joists, plates, studs, or rafters which have been drilled or notched during construction. Not for total member replacement in structural applications. G90 galvanized finish. Single stud requires ten 10d x 1-/12 fasteners and double stud requires twelve 10d and 2" maximum hole size.
|
|
|
|
