|
|
|
|
|
|
Thomas & Betts E989NNJ-CAR Rigid Junction Box, 4 in L X 4 in W X 2 in D
|
|
|
Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth, and external ice formation. UL Listed with a NEMA 6P rating per section 314.29.
|
|
|
|
|
|
|
|
|
|
Carlon E970CD-CTN Rigid Round Conduit Body with Cover, 1/2 in, X, 15.16 cu-in, PVC
|
|
|
Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode.
|
|
|
|
|
|
|
|
|
|
Carlon E970CE-CTN Rigid Round Conduit Body with Cover, 3/4 in, X, 15.16 cu-in, PVC
|
|
|
Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode.
|
|
|
|
|
|
|
|
|
|
Thomas & Betts E365DR Type T Switch Box, 5 Outlet, 1/2 in Threaded Hub
|
|
|
Nonmetallic threaded switch box with five 1/2" threaded holes, for exposed applications with nonmetallic wiring systems only. Mounting feet included. 4" diameter. 13.5 cubic inch capacity.
|
|
|
|
|
|
|
|
|
|
Carlon E987RR Rigid Junction Box, 6 in L x 6 in W x 4 in D
|
|
|
Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth, and external ice formation. UL Listed with a NEMA 6P rating per section 314.29.
|
|
|
|
|
|
|
|
|
|
Raco Wiegmann SC060604RC Pull Box Enclosure, 1 Gang 6 in L x 6 in W x 4 in D
|
|
|
Made of 16 gauge steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish.
|
|
|
|
|
|
|
|
|
|
Raco Wiegmann SC080804RC Pull Box Enclosure, 1 Gang 8 in L x 8 in W x 4 in D
|
|
|
Made of 16 gauge steel. Junction boxes for terminating power or communication conductors. Boxes have flat, removal covers fastened with screws. Mounting holes in the back. Gray enamel finish.
|
|
|
|
|
|
|
|
|
|
Carlon E971FB-CAR Floor Base Box, 90 cu-in
|
|
|
Non-metallic PVC floor box. Water tight gasket and corrosion resistant hardware. Concrete or wood subfloor construction approved. Minimum concrete dept required is 3-1/2". Will provide optional low voltage divider permitting three services (data, telephone, and power) access. Accepts 1/2", 3/4" and 1" conduit and has PVC molded ports. Includes two 1" x 3/4", two 3/4" x 1/2" reducer plugs and two 1" and 3/4" hubs. 90 cubic inch capacity.
|
|
|
|
|
|
|
|
|
|
Thomas & Betts B121BFBRR Adjustable Floor Box, 1 Gang, 21 cu-in
|
|
|
Duplex outlet with ABS cover and dual hinge caps to keep out dust. Adjusts from 0" to 1-7/8", 21 cubic inch capacity. UL Listed 5274 and classified 2HR W/C. UL514C scrub water tested. Patented residential design.
|
|
|
|
|
|
|
|
|
|
Carlon E971FBDI-2 Electrical Box, 1 Gang, 11.8 cu-in x 10 in L x 8 in W x 3.4 in D
|
|
|
Single hole installation. Includes everything needed to install including a hole saw, solid brass cover and single gang grounded receptacle. Low voltage telephone/cable insert plate included. Includes blank plate for custom installation. Polycarbonate construction.
|
|
|
|
