Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE REPAIR > TEST CAPS & PLUGS
Sort By:
1 2
Oatey 39100/33460 Test Caps
Oatey Knock-Out DWV Test Cap, 1-1/2 in, 17 psi, ABS, White
Our Price: $0.39

Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
Oatey 39101/33461 Test Caps
Oatey Knock-Out DWV Test Cap, 2 in, 17 psi, ABS, Yellow
Our Price: $0.39

Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
Oatey 39102/33462 Test Caps
Oatey Knock-Out DWV Test Cap, 3 in, 17 psi, ABS, White
Our Price: $0.49

Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
Oatey 39103/33463 Test Caps
Oatey Knock-Out DWV Test Cap, 4 in, 17 psi, ABS, White
Our Price: $0.59

Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
Worldwide Sourcing TC-15 Flexible Test Caps
Worldwide Sourcing TC-15 Pipe Test Cap, 1-1/2 in, PVC
Our Price: $2.99

For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Worldwide Sourcing TC-2 Flexible Test Caps
Worldwide Sourcing TC-2 Pipe Test Cap, 2 in, PVC
Our Price: $3.49

For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
Fernco PQC-101 Qwik Caps
Fernco PlumQuick DWV Flexible Pipe Cap, 1-1/2 in, 4.3 psi, 1-57/64 in Dia, PVC
Our Price: $3.49

Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
Fernco PQC-102 Qwik Caps
Fernco PlumQuick DWV Flexible Pipe Cap, 2 in, 4.3 psi, 2-25/64 in Dia, PVC
Our Price: $3.99

Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
Oatey 33400 Mechanical Test Plug
Oatey 33400 Mechanical Test Plug, 1-1/2 in, 5 psi Back, Plastic, Red, 110 deg F
Our Price: $3.99

Plastic mechanical plug designed to hold higher pressures.  Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
Worldwide Sourcing TC-3 Flexible TestCaps
Worldwide Sourcing TC-3 Pipe Test Cap, 3 in, PVC
Our Price: $4.29

For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
   
 
1 2