|
|
|
|
|
|
Irwin 5026005 Rotary Percussion Masonry Drill Bit, 1/4 in Dia x 13 in OAL
|
|
|
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
|
|
|
|
|
|
|
|
|
|
Irwin 5026008 Rotary Percussion Masonry Drill Bit, 5/16 in Dia x 13 in OAL
|
|
|
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
|
|
|
|
|
|
|
|
|
|
Dewalt DW5226 Percussion Masonry Drill Bit, 1/4 in Dia x 12 in OAL, 7 in Flute
|
|
|
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
|
|
|
|
|
|
|
|
|
|
Dewalt DW5229 Percussion Masonry Drill Bit, 5/16 in Dia x 12 in OAL, 7 in Flute
|
|
|
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
|
|
|
|
|
|
|
|
|
|
Irwin 326007 Rotary Percussion Masonry Drill Bit, 1/4 in Dia x 12 in OAL
|
|
|
Bit will fit all hammer drills with 3-jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
|
|
|
|
|
|
|
|
|
|
Irwin 5026011 Rotary Percussion Masonry Drill Bit, 3/8 in Dia x 13 in OAL
|
|
|
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
|
|
|
|
|
|
|
|
|
|
Irwin 5026013 Rotary Percussion Masonry Drill Bit, 7/16 in Dia x 13 in OAL
|
|
|
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
|
|
|
|
|
|
|
|
|
|
Dewalt DW5231 Percussion Masonry Drill Bit, 3/8 in Dia x 12 in OAL, 7 in Flute
|
|
|
Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.
|
|
|
|
|
|
|
|
|
|
Bluegranite HCBG08 Hammer Drill Bit, 1/4 in Dia, 12 in L, (2) 10 in Milled U Flute, 1/4 in Straight Shank, Carbide
|
|
|
Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.
|
|
|
|
|
|
|
|
|
|
Irwin 5026016 Rotary Percussion Masonry Drill Bit, 1/2 in Dia x 13 in OAL
|
|
|
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal; 7/16" and larger drill bits have reduced shanks.
|
|
|
|
