Home > FEEDERS > CREEP FEEDERS
Sort By:
1
2 TON CREEP FEEDER
2 TON CREEP FEEDER
Our Price: $2,600.00

THIS FEEDER IS SUPPORTED BY ONE 3500 LB REINFORCED
AXLE WITH NEW 5 ON 5 BOLT PATTERN WHEELS AND USED OR NEW 15” TIRES. THE TROUGH
IS BROKE AND MADE FROM 11 GA. SHEETS WITH THE TOP AND SIDES BEING BROKE AND
MADE FROM 16 GA. SHEETS. THE TONGUE IS MADE OF 2-7/8” X .190 WALL THICKNESS
PIPE REINFORCED WITH 2-3/8 PIPE WITH A 7/8 HITCH PIN HOOK UP ON THE FRONT AND
ON THE BACK. THE FEEDER HAS 1 DOOR ON THE TOP THAT SLIDES AND LOCKS IN PLACE. IT
ALSO HAS 4 DOORS DOWN THE SIDES TO LIMIT THE AMOUNT OF FEED ALLOWED IN THE
TROUGH. THE UNDERCARRIAGE IS MANUFACTURED OUT OF 3 X 3 X 3/16 ANGLE AND HAS A
7000 # DROP JACK THAT WILL SUPPORT THE FEEDER EASILY WHEN LOADED. THEY ARE
PRIMED AND PAINTED WITH INDUSTRIAL GRADE PAINT AND MEASURES 9’ IN LENGTH AND 8’
TALL. THESE FEEDERS HAVE A CLEAN-OUT TRAY IN THE TROUGH AT THE BACK OF THE FEEDER.



TWO (2) TONS IS A SAFE TRANSPORTATION WEIGHT.



MAXIMUM
CAPACITY:
3 TON (DEPENDING ON FEED DENSITY)

4 TON CREEP FEEDER
4 TON CREEP FEEDER
Our Price: $3,400.00

THIS FEEDER IS SUPPORTED BY TWO 3500 LB REINFORCED AXLES
WITH NEW 5 ON 5 BOLT PATTERN WHEELS AND USED OR NEW 15” TIRES. THE TROUGH IS
BROKE AND MADE OF 11 GA. SHEETS WITH THE TOP AND SIDES BROKE AND MADE OF 16 GA.
SHEETS. THE TONGUE IS MADE OF 2-7/8 .190 WALL THICKNESS PIPE REINFORCED WITH 2-3/8
PIPE WITH A 7/8 HITCH PIN HOOK UP ON THE FRONT AND ON THE BACK. THE FEEDER ALSO
HAS 2 DOORS ON THE TOP THAT SLIDE AND LOCK IN PLACE.  IT ALSO HAS 8 DOORS DOWN THE SIDES TO LIMIT
THE AMOUNT OF FEED ALLOWED IN THE TROUGH. THE UNDERCARRIAGE IS MANUFACTURED OUT
OF 3 X 3 X 3/16 ANGLE AND HAS A 7000 # DROP JACK THAT WILL SUPPORT THE FEEDER
EASILY WHEN LOADED. THEY ARE PRIMED AND PAINTED WITH INDUSTRIAL GRADE PAINT AND
MEASURE 15’ IN LENGTH AND 8’ TALL.

THESE FEEDERS HAVE A CLEAN-OUT
TRAY IN THE TROUGH AT THE BACK OF THE FEEDER.
FOUR (4) TONS IS A SAFE TRANSPORTATION WEIGHT.





MAXIMUM
CAPACITY:
6 TONS (DEPENDING ON FEED DENSITY)    

   
 
1