|
|
|
|
|
|
BUFFING PAD FLR 12X18 NYL WHT - Case of 5
|
|
|
For high gloss polishing where highest luster is desired. Use with sandscreen.
|
|
|
|
|
|
|
|
|
|
DISC FLOOR SAND 7X5/16IN 100G - Case of 50
|
|
|
For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit.
|
|
|
|
|
|
|
|
|
|
SANDPAPER SL8 40GRIT - Case of 10
|
|
|
For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit.
|
|
|
|
|
|
|
|
|
|
SANDPAPER SL8 20GRIT - Case of 10
|
|
|
For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit.
|
|
|
|
|
|
|
|
|
|
DISC FLOOR SAND 7X5/16IN 60G - Case of 50
|
|
|
For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit.
|
|
|
|
|
|
|
|
|
|
DISC FLOOR SAND 7X5/16IN 40G - Case of 50
|
|
|
For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit.
|
|
|
|
|
|
|
|
|
|
DISC FLOOR SAND 17IN DIA 150G - Case of 10
|
|
|
For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings.
|
|
|
|
|
|
|
|
|
|
SANDPAPER FLOOR 12X18 100GRIT - Case of 20
|
|
|
20 grit for removing old surface coatings and leveling uneven floors. 36 grit for intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 grit for finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings.
|
|
|
|
|
|
|
|
|
|
DISC SCREEN-BAK 17IN DIA 100G - Case of 10
|
|
|
For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings.
|
|
|
|
|
|
|
|
|
|
DISC FLOOR SAND 7X5/16IN 20G - Case of 50
|
|
|
For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit.
|
|
|
|
